Instructions and warning book
Contact us
Customer Care
HYDRO IN 400
Wall and ceiling built-in hydronic fancoil
The customer service provides
prompt answers within 24 hours.
prompt answers within 24 hours.
More internal comfort
Maximum installation flexibility
Heating and cooling
Technical data HYDRO IN 400 |
|
|---|---|
| Code | 3.029842 |
| Heating output max speed 45/40 °C kW | 2,17 |
| Cooling output max speed 7/12 °C kW | 1,77 |
| Dimensions (HxWxD) mm | 655 x 725 x 126 |
| Flow rate 7/12 °C l/h | 304 |
| Weight (kg) | 12,0 |
Technical data HYDRO IN 400 |
|
|---|---|
| Code | 3.029842 |
| Heating output max speed 45/40 °C kW | 2,17 |
| Cooling output max speed 7/12 °C kW | 1,77 |
| Dimensions (HxWxD) mm | 655 x 725 x 126 |
| Flow rate 7/12 °C l/h | 304 |
| Weight (kg) | 12,0 |
Gallery
Suitable for wall, ceiling or false ceiling built-in installation thanks to the reduced depth. They adapt in any living context, even in bedrooms, for their remarkable silence.
- Reduced aesthetic impact
- Flow and return connections on the left side (with possibility of inversion to the right)
- Respond to every design requirement (on the wall, ceiling, in false ceiling)
- Very low sound impact thanks to the tangential fan and the DC INVERTER motor
- Flat adapters as standard and 3/4" hydraulic connections
- Balancing valves as standard
- Availability of numerous accessories
- Condensate collection system for vertical or horizontal installation as standard
Electronic control board with 0-10 V connection Cod.3.028512
It allows to manage the fan motor, with modulating speed.
On board electronic control with PID full modulating fan Cod.3.030876
To be provided in combination with the smart touch wall controller with temperature probe code 3.030877 and 3.030878; it is installed inside the fan coil and allows the engine to be operated with continuous modulating operation.
Smart touch wall controller with temperature probe (black casing) Cod.3.030877
The kit includes control panel with PI logic and room probe for control up to 30 units.
To combine with the on board electronic control with PID full modulating fan code 3.030876.
Adjustment of temperature in hot and cold at modulating speed of the engine.
Smart touch wall controller with temperature probe (white casing) Cod.3.030878
The kit includes control panel with PI logic and room probe for control up to 30 units.
To combine with the on board electronic control with PID full modulating fan code 3.030876.
Adjustment of temperature in hot and cold at modulating speed of the engine.
Universal control board for commercial thermoregulation Cod.3.028511
For installation on the machine, allows to manage the fan motor, with fixed speeds.
2-way group valve kit Cod.3.028507
Composed of automatic valve with thermoelectric head and holder to balance the plant load losses.
3-way group valve kit Cod.3.028508
Composed of three-way diverter valve with thermoelectric head, by-pass tube and holder to balance plant load losses.
90° bended duct for HYDRO IN 400 Cod.3.029857
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
Air flow aluminum grill with curved profile for HYDRO IN 400 Cod.3.029892
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
Air flow aluminum grill with straight profile for HYDRO IN 400 Cod.3.029862
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
Air intake aluminum grill with curved profile for HYDRO IN 400 Cod.3.029872
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
In aluminum. The curved profile completely masks the interior providing more elegance to the application.
Air intake aluminum grill with straight profile for HYDRO IN 400 Cod.3.029867
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing
Air intake suction duct for HYDRO IN 400 Cod.3.029847
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom
Casing cover panel with intake air grill for HYDRO IN 400 Cod.3.029882
Kit for wall built-in installation
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 972 x 9 mm
Ceiling casing cover panel with accessible air grill for HYDRO IN 4000 Cod.3.029887
Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 972 x 9 mm
Connection cable to shift water connections from left to right Cod.3.029834
to be used in case of reversibility of the hydraulic pipe connections on the right side, rotating the battery 180°
Sheet metal casing for HYDRO IN 400 Cod.3.029877
Kit for wall built-in and ceiling built-in installation
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 915 x 142 mm
Variable lenght air flow duct for HYDRO IN 400 Cod.3.029852
Kit for ceiling built-in and for recessed installation in false ceiling with bottom air intake and horizontal throwing.
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
Suitable for wall, ceiling or false ceiling built-in installation thanks to the reduced depth. They adapt in any living context, even in bedrooms, for their remarkable silence.
- Reduced aesthetic impact
- Flow and return connections on the left side (with possibility of inversion to the right)
- Respond to every design requirement (on the wall, ceiling, in false ceiling)
- Very low sound impact thanks to the tangential fan and the DC INVERTER motor
- Flat adapters as standard and 3/4" hydraulic connections
- Balancing valves as standard
- Availability of numerous accessories
- Condensate collection system for vertical or horizontal installation as standard
Electronic control board with 0-10 V connection Cod.3.028512
It allows to manage the fan motor, with modulating speed.
On board electronic control with PID full modulating fan Cod.3.030876
To be provided in combination with the smart touch wall controller with temperature probe code 3.030877 and 3.030878; it is installed inside the fan coil and allows the engine to be operated with continuous modulating operation.
Smart touch wall controller with temperature probe (black casing) Cod.3.030877
The kit includes control panel with PI logic and room probe for control up to 30 units.
To combine with the on board electronic control with PID full modulating fan code 3.030876.
Adjustment of temperature in hot and cold at modulating speed of the engine.
Smart touch wall controller with temperature probe (white casing) Cod.3.030878
The kit includes control panel with PI logic and room probe for control up to 30 units.
To combine with the on board electronic control with PID full modulating fan code 3.030876.
Adjustment of temperature in hot and cold at modulating speed of the engine.
Universal control board for commercial thermoregulation Cod.3.028511
For installation on the machine, allows to manage the fan motor, with fixed speeds.
2-way group valve kit Cod.3.028507
Composed of automatic valve with thermoelectric head and holder to balance the plant load losses.
3-way group valve kit Cod.3.028508
Composed of three-way diverter valve with thermoelectric head, by-pass tube and holder to balance plant load losses.
90° bended duct for HYDRO IN 400 Cod.3.029857
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
Air flow aluminum grill with curved profile for HYDRO IN 400 Cod.3.029892
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
Air flow aluminum grill with straight profile for HYDRO IN 400 Cod.3.029862
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
Air intake aluminum grill with curved profile for HYDRO IN 400 Cod.3.029872
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
In aluminum. The curved profile completely masks the interior providing more elegance to the application.
Air intake aluminum grill with straight profile for HYDRO IN 400 Cod.3.029867
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing
Air intake suction duct for HYDRO IN 400 Cod.3.029847
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom
Casing cover panel with intake air grill for HYDRO IN 400 Cod.3.029882
Kit for wall built-in installation
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 972 x 9 mm
Ceiling casing cover panel with accessible air grill for HYDRO IN 4000 Cod.3.029887
Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 972 x 9 mm
Connection cable to shift water connections from left to right Cod.3.029834
to be used in case of reversibility of the hydraulic pipe connections on the right side, rotating the battery 180°
Sheet metal casing for HYDRO IN 400 Cod.3.029877
Kit for wall built-in and ceiling built-in installation
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 915 x 142 mm
Variable lenght air flow duct for HYDRO IN 400 Cod.3.029852
Kit for ceiling built-in and for recessed installation in false ceiling with bottom air intake and horizontal throwing.
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
Related products
Contacts
Recupero Codice Tessera
Inserisci l’e-mail con cui sei registrato al Caius Club e il dato richiesto ti sarà inviato automaticamente.
Se non hai mai registrato la tua e-mail o se l'hai cambiata, comunicala subito a caiusclub@immergas.com o contatta il Club al numero verde 800 306 306.
Recupero Password
Inserisci il codice tessera e l’e-mail con cui sei registrato al Caius Club e il dato richiesto ti sarà inviato automaticamente.
Se non hai mai registrato la tua e-mail o se l'hai cambiata, comunicala subito a caiusclub@immergas.com o contatta il Club al numero verde 800 306 306.
