The range of Immergas accessories for boilers and water heaters ensures ease of installation, all types of programming and remote control.
For hybrid and full electric solutions, Victrix Superior, Hercules range, Victrix Tera V3, Victrix Extra and Maior.
Dimensions (H=113,5 mm x W=123,5 mm x D=33,5 mm).
Can be directly combined with MAGIS HERCULES ErP and MAGIS M.
Requires 230 Vac power supply.
Electronic controller with a microprocessor designed to be a "single manager" for integrated systems (e.g., boilers, heat pumps, and solar thermal systems).
The system manager allows you to select and activate the most convenient heat source based on the set environmental and economic parameters. It features a backlit display. Power must be supplied via a 48 VDC or 24 VAC – 50 Hz transformer (not included).
To be used with radiant systems that also work in cooling mode
Allows you to measure ambient temperature and humidity. To be used with radiant systems that also work in cooling mode.
Requires low voltage power supply (24 Vac).
To be used with radiant systems that also work in cooling mode.
Ideal for reading the room temperature of second or third zone.
To be paired to sensor receiver code 3.030908.
ON/OFF room thermostat.
Wireless ON/OFF room thermostat.
For buildings not equipped with telephone network.
For buildings equipped with telephone network.
Control unit for external circulators/zone valves to manage 3 zones (2 mixed and 1 direct).
To be installed for the deumidifiers management without in absence of system manager kit.
Dedicated to MAGIS PRO V2 and MAGIS COMBO V2
For TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
For TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.
Allows to check the DHW temperature of a Storage Tank Unit or puffer.
Provided as per standard on all Storage Tank Units in the catalogue (except UB 300/550/750 V2).
For generators set to low temperature.
For MAGIS M TOP.
Allows you to manage auxiliary devices such as: circulation pump, mixing valve, and flow probe.
Dimensions (H x W x D) 199 x 242 x 49 mm
For MAGIS M TOP.
Specific for managing the dehumidifier (and any related valve) in neutral and/or cooled air.
For hybrid and full electric solutions, Victrix Superior, Hercules range, Victrix Tera V3, Victrix Extra and Maior.
Dimensions (H=113,5 mm x W=123,5 mm x D=33,5 mm).
To manage MAGIS M TOP remotely both through the dedicated app and the portal. Compatible with major voice assistants (Alexa and Google Home web).
Dimensions (H x W x D) 87 x 124 x 26 mm
User interface for managing the operation of MAGIS M TOP (black color).
It is also chronothermostat and a temperature/humidity sensor.
Dimensions (H x W x D) mm 103 x 147,4 x 20,5
User interface for managing the operation of MAGIS M TOP (white color).
It is also chronothermostat and a temperature/humidity sensor.
Dimensions (H x W x D) mm 103 x 147,4 x 20,5
Can be directly combined with MAGIS HERCULES ErP and MAGIS M.
Requires 230 Vac power supply.
Electronic controller with a microprocessor designed to be a "single manager" for integrated systems (e.g., boilers, heat pumps, and solar thermal systems).
The system manager allows you to select and activate the most convenient heat source based on the set environmental and economic parameters. It features a backlit display. Power must be supplied via a 48 VDC or 24 VAC – 50 Hz transformer (not included).
To be used with radiant systems that also work in cooling mode
Allows you to measure ambient temperature and humidity. To be used with radiant systems that also work in cooling mode.
Requires low voltage power supply (24 Vac).
To be used with radiant systems that also work in cooling mode.
ON/OFF room thermostat.
Wireless ON/OFF room thermostat.
To be installed for the deumidifiers management without in absence of system manager kit.
Dedicated to MAGIS PRO V2 and MAGIS COMBO V2
only for system controller
only for system controller
For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.
Allows to check the DHW temperature of a Storage Tank Unit or puffer.
Provided as per standard on all Storage Tank Units in the catalogue (except UB 300/550/750 V2).
For generators set to low temperature.
To be used for DHW temperature control with storage tank units, for mixed zone managing or to control puffer/buffer temperature but also to manage solar plants.
Allows to check the DHW temperature of a Storage Tank Unit or puffer.
Provided as per standard on all Storage Tank Units in the catalogue (except UB 300/550/750 V2).
Hi-tech smart wireless remote control with Bluetooth technology
The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20
For controlling the temperature in several areas of the house (example living and sleeping areas).
The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).
It allows the covering of the wall hole for electrical boxes type 503.
Backlit modulating thermostat with remote boiler control; integrates special functions including antifreeze temperature setting and anti-legionella function (only for boilers with storage tank).
Modulating thermostat with remote control of boiler controls
ON/OFF room thermostat.
Wireless ON/OFF room thermostat.
For buildings equipped with telephone network.
For generators set to low temperature.
For HERCULES Condensing and HERCULES Solar.
This is a modulating control unit that serves to optimize climatic
management of the temperature in rooms.
It can only be used on systems with a single temperature control.
To be used together with Cascade and Zones regulator kit (1 for each boiler).
To be used to manage 1 additional zone (direct or mixed) up to a maximum
of 5.
If the cascade and zone regolator is not install inside an electrical box.
Modulating temperature control, backlit display and remote management of
the zone. It works together with the Cascade and Zones regulator kit.
Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone. Allows control of room temperature only.
ON/OFF room thermostat.
Wireless ON/OFF room thermostat.
For buildings not equipped with telephone network.
For buildings equipped with telephone network.
It can manage 3 water distribution zones plus an external storage tank unit
and thermal solar for DHW production, both in standalone and cascade
configurations. It includes power supply connection for installation on a DIN
rail.
To match VICTRIX SUPERIOR 35 PLUS and VICTRIX TERA 35 PLUS V2 EU in cascade
Electric interface Gas boiler-Cascade and zones regulator kit; it is necessary one interface each gas boiler.
For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.
To be located on the delivery side of the plant, after the hydraulic
separator, it allows the cascade and zone regulator to manage the
delivery temperature of the plant or of the mixed zones available
Connected to the boiler board, it measures the delivery temperature after the hydraulic manifold.
Paired with cascade and zone regulator kit, it optimizes energy
consumption by adjusting the plant delivery temperature for variable
temperature functioning
Can be combined exclusively with the cascade and zone regulator for connection to an ethernet network or via router/modem to an ADSL line for connection to a remote system.
It works together with the Cascade and Zones regulator kit. It allows remote
management of the device with a dedicated APP.
Hi-tech smart wireless remote control with Bluetooth technology
The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20
For controlling the temperature in several areas of the house (example living and sleeping areas).
The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).
It allows the covering of the wall hole for electrical boxes type 503.
For hybrid and full electric solutions, Victrix Superior, Hercules range, Victrix Tera V3, Victrix Extra and Maior.
Dimensions (H=113,5 mm x W=123,5 mm x D=33,5 mm).
Backlit modulating thermostat with remote boiler control; integrates special functions including antifreeze temperature setting and anti-legionella function (only for boilers with storage tank).
Wireless backlit modulating thermostat with remote boiler controls; integrates new functions including anti-freeze temperature setting and anti-legionella function (for boilers with storage tank only).
Modulating thermostat with remote control of boiler controls
Compact modulating thermostat for remote control of boilers.
Note: Can only be installed in single-zone systems and without an external probe or DOMINUS interface kit.
Ideal for reading the room temperature of second or third zone.
To be paired to sensor receiver code 3.030908.
Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone. Allows control of room temperature only.
ON/OFF room thermostat.
Wireless ON/OFF room thermostat.
For buildings not equipped with telephone network.
For buildings equipped with telephone network.
Control unit for external circulators/zone valves to manage 3 zones (2 mixed and 1 direct).
It can manage 4 zones at the same temperature or 1 mixed and 1 direct zone by remote modulating controls (ie. CAR V2).
For VICTRIX ZEUS, VICTRIX MAIOR TT/X, VICTRIX TT ErP/X, VICTRIX EXA/X, VICTRIX TERA VIP, VICTRIX TERA/PLUS, VICTRIX OMNIA, MYTHOS HP, NIKE/AVIO ECO and NIKE STAR 24.
Allows to check the DHW temperature of a Storage Tank Unit or puffer.
Provided as per standard on all Storage Tank Units in the catalogue (except UB 300/550/750 V2).
To be located on the delivery side of the plant, after the hydraulic
separator, it allows the cascade and zone regulator to manage the
delivery temperature of the plant or of the mixed zones available
For generators set to low temperature.
Paired with cascade and zone regulator kit, it optimizes energy
consumption by adjusting the plant delivery temperature for variable
temperature functioning
Can be combined exclusively with the cascade and zone regulator for connection to an ethernet network or via router/modem to an ADSL line for connection to a remote system.
For HERCULES Condensing and HERCULES Solar.
Hi-tech smart wireless remote control with Bluetooth technology
The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20
For controlling the temperature in several areas of the house (example living and sleeping areas).
The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).
It allows the covering of the wall hole for electrical boxes type 503.
Backlit modulating thermostat with remote boiler control; integrates special functions including antifreeze temperature setting and anti-legionella function (only for boilers with storage tank).
Wireless backlit modulating thermostat with remote boiler controls; integrates new functions including anti-freeze temperature setting and anti-legionella function (for boilers with storage tank only).
Modulating thermostat with remote control of boiler controls
Compact modulating thermostat for remote control of boilers.
Note: Can only be installed in single-zone systems and without an external probe or DOMINUS interface kit.
ON/OFF room thermostat.
Wireless ON/OFF room thermostat.
For buildings not equipped with telephone network.
For buildings equipped with telephone network.
It can manage 4 zones at the same temperature or 1 mixed and 1 direct zone by remote modulating controls (ie. CAR V2).
For VICTRIX ZEUS, VICTRIX MAIOR TT/X, VICTRIX TT ErP/X, VICTRIX EXA/X, VICTRIX TERA VIP, VICTRIX TERA/PLUS, VICTRIX OMNIA, MYTHOS HP, NIKE/AVIO ECO and NIKE STAR 24.
To be provided in combination with the smart touch wall controller with temperature probe code 3.030877 and 3.030878; it is installed inside the fan coil and allows the engine to be operated with continuous modulating operation.
For external installations, in partially protected places
For external installations, in partially protected places
For condensing boilers < 35 kW.
For condensing boilers < 35 kW.
For condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For air intake from technical installation room.
For HERCULES CONDENSING range
for condensing boilers
for condensing boilers
for condensing boilers
For VICTRIX ZEUS SUPERIOR, VICTRIX SUPERIOR, VICTRIX MAIOR and VICTRIX EXTRA.
for condensing boilers < 35 kW.
Max lenght 12,9 m.
For condensing boiler < 35 kW.
Max lenght 11,9 m.
For condensing boiler < 35 kW.
for condensing boilers < 35 kW.
for condensing boilers < 35 kW.
For condensing boiler < 35 kW.
To be used with the concentric kits.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
Hole closing panel, inspection door and grommet for ducting system.
L=12 m + 4 centering spacers.
For condensing boilers.
For condensing boilers.
For condensing boilers.
For condensing boilers.
For condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
For condensing boilers < 35 kW.
For VICTRIX PRO 35/55/60/68/80 V2 (to discharge at roof) and UCI EUREKA.
for VICTRIX PRO 35/55/60/68/80 V2
for condensing boilers
For VICTRIX PRO V2 and RAPAX 200-300 V3.
For VICTRIX PRO V2 and RAPAX 200-300 V3.
for heat pump water heater RAPAX 300 V4 e RAPAX SOL 300 V4.
for heat pump water heater RAPAX 100 V4, RAPAX 200 V4, RAPAX SOL 200 V4.
for heat pump water heater RAPAX 100 V4, RAPAX 200 V4, RAPAX SOL 200 V4.
for heat pump water heater RAPAX 300 V4 e RAPAX SOL 300 V4.
for heat pump water heater RAPAX 100 V4, RAPAX 200 V4, RAPAX SOL 200 V4.
for heat pump water heater RAPAX 100 V4, RAPAX 200 V4, RAPAX SOL 200 V4.
for heat pump water heater RAPAX 300 V4 e RAPAX SOL 300 V4.
for heat pump water heater RAPAX 300 V4 e RAPAX SOL 300 V4.
For condensing boilers < 35 kW.
For condensing boilers < 35 kW.
For condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For air intake from technical installation room.
For HERCULES CONDENSING range
for condensing boilers
for condensing boilers
for condensing boilers
for condensing boilers < 35 kW.
Max lenght 12,9 m.
For condensing boiler < 35 kW.
Max lenght 11,9 m.
For condensing boiler < 35 kW.
for condensing boilers < 35 kW.
for condensing boilers < 35 kW.
For condensing boiler < 35 kW.
To be used with the concentric kits.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
Hole closing panel, inspection door and grommet for ducting system.
L=12 m + 4 centering spacers.
For condensing boilers.
For condensing boilers.
For condensing boilers.
For condensing boilers.
For condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
For condensing boilers < 35 kW.
for VICTRIX PRO 35/55/60/68/80 V2
for condensing boilers
(stainless steel) VICTRIX PRO 35/55/60/68/80 V2
(for outdoor) length 0.55m
Technical note: size is not adjustable
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
for condensing boilers
for VICTRIX PRO 35/55/60/68/80 V2 (to discharge horizontally)
for VICTRIX PRO 35/55/60/68/80 V2 (to discharge in the chimney)
for condensing boilers
for condensing boilers
For condensing boilers < 35 kW.
For condensing boiler < 35 kW.
Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers.
For condensing boilers.
For condensing boilers.
For VICTRIX PRO 35/55/60/68/80 V2 (to discharge at roof) and UCI EUREKA.
For VICTRIX PRO 180 V2 2 (to discharge at roof)
For VICTRIX PRO 100/120/150 V2 (to discharge at roof)
for VICTRIX PRO 100-120 ErP.
(stainless steel)
VICTRIX PRO 100/120/150 V2
(for outdoor) length 1m
For VICTRIX PRO 180 V2
(for outdoor) length 1m
Technical note: size is not adjustable
for VICTRIX PRO 100/120/150 V2 (to discharge in the chimney)
For VICTRIX PRO 180 V2 (to discharge in the chimney)
for VICTRIX PRO 100/120/150 V2 (to discharge horizontally)
For VICTRIX PRO 180 V2 (to discharge horizontally)
for VICTRIX PRO 100/120/150 V2
For VICTRIX PRO 180 V2 0,5 m long
for VICTRIX PRO 100/120/150 V2
For VICTRIX PRO 180 V2 1 m long
for VICTRIX PRO 35/55/60/68/80 V2
for condensing boilers
for VICTRIX PRO 100/120/150 V2
For VICTRIX PRO 180 V2 2 m long
for VICTRIX PRO 100/120/150 V2
For VICTRIX PRO 180 V2
for VICTRIX PRO 100/120/150 V2
For VICTRIX PRO 180 V2
For VICTRIX PRO 35-55-60-68-80 V2.
For VICTRIX PRO 100-120-150 V2.
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 100/120/150 V2
for VICTRIX PRO 35/55/60/68/80 V2
(black coloured, with converse for pitched roofs)
for VICTRIX PRO 100/120/150 V2
(black coloured, with converse for pitched roofs)
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 100/120/150 V2 (color RAL 9010)
For VICTRIX PRO 35/55/60/68/80 V2 and condensing boiler < 35 kW.
for VICTRIX PRO 100/120/150 V2
for VICTRIX PRO 35/55/60/68/80 V2 and condensing boiler < 35 kW.
for VICTRIX PRO 100/120/150 V2
for VICTRIX PRO 100/120/150 V2
for VICTRIX PRO 100/120/150 V2
for exhaust connection of two boilers in cascade
Exhaust manifold kit Ø 200 with flue lock DN 125 for exhaust connection of two boilers in cascade.
for connection of an additional boiler
Additional exhaust manifold kit Ø 200 with flue lock DN 125 for connection of an additional boiler
Additional exhaust manifold kit Ø 250 with flue lock DN 125 for 4 VICTRIX PRO 150 V2
Additional exhaust manifold kit Ø 250 with flue lock DN 125 for 5 VICTRIX PRO 150 V2
For VICTRIX PRO V2 and RAPAX 200-300 V3.
For installations in central heating systems with VICTRIX PRO V2.
For VICTRIX PRO V2 and RAPAX 200-300 V3.
For installations in central heating systems with VICTRIX PRO V2.
For installations in central heating systems with VICTRIX PRO V2.
For VICTRIX PRO V2 and RAPAX 200/300 V3
For installations in central heating systems with VICTRIX PRO V2.
for VICTRIX PRO V2 and RAPAX 200/300 V3
For installations in central heating systems with VICTRIX PRO V2.
For installations in central heating systems with VICTRIX PRO V2.
for air intake for VICTRIX PRO 35/55/60/68/80 V2 with B23 configuration
for air intake for VICTRIX PRO 100/120/150 V2 with
B23 configuration
for VICTRIX PRO 180 V2 with B23 configuration
For external installations, in partially protected places
For external installations, in partially protected places
For condensing boilers < 35 kW.
For condensing boilers < 35 kW.
(stainless steel) VICTRIX PRO 35/55/60/68/80 V2
(for outdoor) length 0.55m
Technical note: size is not adjustable
For condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For air intake from technical installation room.
For HERCULES CONDENSING range
for condensing boilers
for condensing boilers
for condensing boilers
For VICTRIX ZEUS SUPERIOR, VICTRIX SUPERIOR, VICTRIX MAIOR and VICTRIX EXTRA.
for condensing boilers < 35 kW.
Max lenght 12,9 m.
For condensing boiler < 35 kW.
Max lenght 11,9 m.
For condensing boiler < 35 kW.
for condensing boilers < 35 kW.
for condensing boilers < 35 kW.
For condensing boiler < 35 kW.
To be used with the concentric kits.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
For condensing boilers < 35 kW.
For condensing boiler < 35 kW.
Hole closing panel, inspection door and grommet for ducting system.
L=12 m + 4 centering spacers.
For condensing boilers.
For condensing boilers.
For condensing boilers.
For condensing boilers.
For condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
For condensing boilers < 35 kW.
for VICTRIX PRO 35/55/60/68/80 V2
for condensing boilers
For VICTRIX PRO 35/55/60/68/80 V2 and condensing boiler < 35 kW.
for VICTRIX PRO 35/55/60/68/80 V2 and condensing boiler < 35 kW.
Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).
Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350
Recessed frame for solutions MAGIS COMBO PLUS.
is the first of the main components of MAGIS COMBO PLUS with SOLAR CONTAINER COMBO solutions.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 430
Recessed frame for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 or MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 1100 x 495
Technical box for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365
Technical box for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 and MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems for indoor installations. It allows the housing of the main components (except for the heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 1160 x 520
including fittings, 4 shut-off knobs and predisposition to insert the “Y" filters for zone 1 and 2
including fittings, 4 shut-off knobs and predisposition to insert the “Y" filters for zone 1 and 2
including fittings, 4 shut-off knobs and predisposition to insert the “Y" filters for zone 1 and 2
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
For connection R32 toward the lower part of the Container
For MAGIS PRO 12-14-16 V2, MAGIS COMBO/PLUS 12-14-16 V2, MAGIS HERCULES MINI HYDRO 12 and MAGIS M 12-16 TOP.
For MAGIS PRO V2 4-6-9, MAGIS COMBO V2 4-6-9, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO 5-8 and MAGIS M 5-8 TOP.
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI 6-9/EH, MAGIS COMBO V2 4-6-9, MAGIS HERCULES MINI HYDRO 5-8 and MAGIS M 5-8 TOP.
For 2 direct zones (only heating)
For MAGIS HERCULES MINI HYDRO 12, MAGIS PRO 12-14-16 V2 e MAGIS COMBO 12-14-16 V2/ PLUS and MAGIS M 12-16 TOP.
For 2 direct zones (heating only)
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI, MAGIS COMBO V2 4-6-9, MAGIS HERCULES MINI HYDRO 5-8 and MAGIS M 5-8 TOP.
For 1 direct and 1 mixed zones (only heating)
To be installed inside of MAGIS HERCULES ErP. The kit includes low consumption pump, mixing valve, expansion and relais for third zone.
Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.
Suitable to install it under external unit it is necessary adapter kit code 3.030915
Ideal for outdoor installation in combination with MAGIS M and MAGIS M TOP.
Ideal for outdoor installation in combination with MAGIS M and MAGIS M TOP.
It's possible install this kit inside MAGIS HERCULES.
To be used to manage the recirculation pump.
For wall-hung combi boilers and also for wall-hung with built-in storage tank.
For wall-hung outdoor boilers.
To be installaed inside of MAGIS HERCULES ErP.
For MAGIS M4-6 and MAGIS M TOP.
For outdoor unit of VICTRIX HYBRID.
For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO, MAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
To be installed inside MAGIS HERCULES ErP, to separate AUDAX TOP ErP from the boiler.
Low consumption pump and connection pipes as standard.
For floor standing boilers: compact condensate drain pump kit.
For wall-hung boilers: compact condensate drain pump kit.
For VICTRIX SUPERIOR.
For MAGIS HERCULES ErP.
For VICTRIX SUPERIOR, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2.
Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).
Available for wall-hung condensing boilers.
For wall-hung condensing boilers.
for VICTRIX SUPERIOR
For partially protected area installation
Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).
Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350
Recessed frame for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 or MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 1100 x 495
Technical box for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365
Technical box for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 and MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems for indoor installations. It allows the housing of the main components (except for the heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 1160 x 520
including fittings, 4 shut-off knobs and predisposition to insert the “Y" filters for zone 1 and 2
including fittings, 4 shut-off knobs and predisposition to insert the “Y" filters for zone 1 and 2
including fittings, 4 shut-off knobs and predisposition to insert the “Y" filters for zone 1 and 2
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
For connection R32 toward the lower part of the Container
for MAGIS HERCULES PRO 4-6-9
Allow an easy connection of the refrigerant
circuit in the case of pipes coming out from the indoor unit
rear wall.
for MAGIS HERCULES PRO 12-14-16
Allow an easy connection of the refrigerant
circuit in the case of pipes coming out from the indoor unit
rear wall.
for MAGIS HERCULES PRO MINI
To connect gas fittings to the rear wall
For MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
For MAGIS PRO 12-14-16 V2, MAGIS COMBO/PLUS 12-14-16 V2, MAGIS HERCULES MINI HYDRO 12 and MAGIS M 12-16 TOP.
For MAGIS PRO V2 4-6-9, MAGIS COMBO V2 4-6-9, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO 5-8 and MAGIS M 5-8 TOP.
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI 6-9/EH, MAGIS COMBO V2 4-6-9, MAGIS HERCULES MINI HYDRO 5-8 and MAGIS M 5-8 TOP.
For 2 direct zones (only heating)
For MAGIS HERCULES MINI HYDRO 12, MAGIS PRO 12-14-16 V2 e MAGIS COMBO 12-14-16 V2/ PLUS and MAGIS M 12-16 TOP.
For 2 direct zones (heating only)
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI, MAGIS COMBO V2 4-6-9, MAGIS HERCULES MINI HYDRO 5-8 and MAGIS M 5-8 TOP.
For 1 direct and 1 mixed zones (only heating)
For MAGIS HERCULES PRO 4/6/9.
Composed by: 1 low consumption pump, mixing valve and
connection pipes.
For MAGIS HERCULES PRO 4/6/9.
Composed by: 1 low consumption pump, 1 mixing valve,
connection pipes and expansion.
For MAGIS HERCULES PRO 12/14/16 and 12 T/14 T/16 T
Composed by: 1 low consumption pump, mixing valve and
connection pipes.
For MAGIS HERCULES PRO 12/14/16 and 12 T/14 T/16 T
Composed by: 1 low consumption pump, 1 mixing valve,
connection pipes and expansion.
Ideal for outdoor installation in combination with MAGIS M and MAGIS M TOP.
Ideal for outdoor installation in combination with MAGIS M and MAGIS M TOP.
For INOXSTOR 200-300-500 V2, OMNISTOR 300-500, UB 550-750 V2 and UB PRO SOL.
Power supply 230 or 400 Vac.
For UB 1000-1500 V2, UB 750 V2 and UB PRO SOL.
Power supply 230 or 400 Vac.
To be installed inside the MAGIS HERCULES PRO internal unit casing
To be installed inside the MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO internal unit casing
For MAGIS HERCULES PRO.
Composed by: plate heat exchanger, single solar pump
station (with low consumption circulation pump), solar
central unit, connection pipes,18 litre solar expansion vessel,
temperature probes (for collectors and storage tank).
N.B.: For solar panel and other solar accessories see the
solar catalogue.
For MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO
Composed by: plate heat exchanger, single solar pump station (with low consumption circulation pump), solar central unit, shut off knobs, connection pipes, mixing valve, 18 litre solar expansion vessel, temperature probes (for collectors and storage tank).
Shut off knobs with filters
1" connections (for zones 2 and 3, only); standard for zone 1.
For MAGIS HERCULES MINI HYDRO.
For MAGIS HERCULES PRO MINI
For MAGIS M8/12/14/16/18/22/26/30
For MAGIS M4-6 and MAGIS M TOP.
For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO, MAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.
For heat pump only plants with MAGIS PRO V2, 3 kW (to be installed inside of the hydronic unit).
Electric power supply 230V-50Hz single phase + earthing
For MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO
For TRIO PACK ELECTRIC system ELECTRIC.
For internal installation
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
For plants with MAGIS M and MAGIS M TOP.
Used to manage solar plant paired to boiler configurations with cascade and zone regulator kit (3.021522)
To be installed inside the casing.
Combined Storage Tank Unit for heating and domestic hot water integration.
The 295 litres Storage Tank Unit is equipped with two concentric coil shaped stainless steel water to water heat exchangers, one of them dedicated to DHW production and the other one fit for energy integration, in case of coupling with solar collector or another energy source.Polyurethane (PU) rigid insulation thick 70 mm (which can bedisassembled in case of necessity).The standard anodic protection system is given by two magnesium anodes, one of them placed in the upper part of the storage and the other inserted in the bottom, close to the flange.
This solution can be easily integrated with its own optional kit.
UB 3000 V2 body is pre-arranged to fix double pump station and to insert electric resistance kit.
Ideal solution for single-family homes, storage tank unit has 5 years conventional warranty.
Vitrified steel storage tank unit for the production of domestic hot water.
The UB PRO SOL 800 is equipped with two water/water exchanger coils, one with a larger surface area for heat pump pairing and one for solar thermal systems pairing, and 2 magnesium anodes. The 763-litre storage tank is made up of a special internal porcelain enamel treatment (called vitrification) which gives the product high resistance to water and steam, as well as protecting it from corrosion, and preserves the chemical-physical properties of the domestic hot water. The inspection flange is located in the lower part. The insulation is rigid in polyurethane (PU) with a thickness of 95 mm, removable only if necessary. Optional electrical DHW integrative resistance.
Dimensions (H x Ø) mm 1985 x 990
Vitrified steel storage tank unit for the production of domestic hot water.
The UB PRO SOL 1000 is equipped with two water/water exchanger coils, one with a larger surface area for heat pump pairing and one for solar thermal systems pairing, and 2 magnesium anodes. The 856-litre storage tank is made up of a special internal porcelain enamel treatment (called vitrification) which gives the product high resistance to water and steam, as well as protecting it from corrosion, and preserves the chemical-physical properties of the domestic hot water. The inspection flange is located in the lower part. The insulation is rigid in polyurethane (PU) with a thickness of 95 mm, removable only if necessary. Optional electrical DHW integrative resistance.
Dimensions (H x Ø) mm 2185 x 990
Double electronic anode kit for UB INOX 200 V2/UB INOX SOLAR 200 V2 and HERCULES SOLAR
For INOXSTOR 200-300-500 V2, OMNISTOR 300-500, UB 550-750 V2 and UB PRO SOL.
Power supply 230 or 400 Vac.
For UB 1000-1500 V2, UB 750 V2 and UB PRO SOL.
Power supply 230 or 400 Vac.
For two UB INOX 120 V2 or two UB INOX 200 V2 in parallel.
Including pipes and fittings for connection in template.
For 2 UB INOX 120 V2 or 2 UB INOX 200 V2 in parallel.
(for external temperatures from 0 °C to -13 °C).
For SOLARSMART.
Recommended when SOLARSMART is directly connected
to user.
For SOLARSMART.
Recommended when SOLARSMART is directly connected
to user.
For SOLARSMART.
Setted at 6 bar and 94 °C.
Used to manage the temperature of the water tank unit paired, in boiler
rooms, with cascade and zone regulator kit
Used to manage solar plant paired to boiler configurations with cascade and zone regulator kit (3.021522)
Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).
Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350
Technical box for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
To realize two high temperature zones or two low
For HERCULES SOLAR 25 and HERCULES 25-35
Modulating low consumption pump.
To realize one low temperature zone and one high temperature zone
For HERCULES SOLAR 25 and HERCULES 25-35
Modulating low consumption pumps.
To realize two low temperature zones and one high temperature zone
For HERCULES SOLAR 25 and HERCULES 25-35
Modulating low consumption pumps.
To realize three high temperature zones or three low
For HERCULES SOLAR 25 and HERCULES 25-35
For HERCULES SOLAR 26 ErP
For alignment of solar circuit in template.
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
For floor standing boilers: compact condensate drain pump kit.
Specially sized for large thermal systems with high water content.
Equipped with sludge collection filter on the return pipe.
Insulation as standard
for replacement of VICTRIX 50 and 75 versions in single wall unit
configuration
Usable in outdoor installations for minimum temperature as low as -15 °C.
necessary to neutralize the acidity of the condensation. Inclusive of
granulate.
For condensate neutralizer until 180 kW
Complete recharge for condensate neutralizer kit until 1500 kW
For single VICTRIX PRO V2
To be used in case of opposite slope between siphon and discharge
It can only be installed inside the building and outside the appliance
For installation both on right and left side
The kit includes connecting pipes, air vent, discharge tap, filling taps and
connection to expansion vessel
The kit includes connecting pipes, air vent, discharge tap, filling taps and
connection to expansion vessel
it can be installed outdoor.
It includes 4 support feet that ensure stable installation and its handling by
forklift truck or transpallet to be positioned below the cabinet frame.
Alternatively, you can move the cabinet by means of 4 eyebolts in the upper
part.
The cabinet has a door that can be opened by 180 inclusive of lock.
The kit includes hydraulic manifold DN 100, safety kit and condensate discharge
manifold DN 50. The installer has to realise gas manifold based on design.
Designed to resolve installation situations in which the wall of the boiler
room is not usable.
With this modular construction, it is necessary to order a kit for every boiler
installed.
Approved also for installation outside the building.
Designed to resolve installation situations in which the wall of the boiler
room is not usable.
With this modular construction, it is necessary to order a kit for every boiler
installed.
Approved also for installation outside the building
includes a 2-way valves, a 3-way interception valve and a non-return valve
for each generator.
Insulation as standard.
in combination with kit 3.032338, it serves to connect from 3 to 5 VICTRIX
PRO V2 boilers in cascade installation (one kit required for each additional
boiler); includes a 2-way interception valve, a 3-way interception valve and
a non-return valve. Insulation as standard
kit includes a 2 way interception valve, a 3-way interception valve and a
non-return valve for each generator.
Insulation as standard
in combination with kit 3.033667 serves to connect from 3 to 5 VICTRIX
PRO V2 boilers in cascade installation (one kit required for each additional
boiler); includes a 2-way interception valve, a 3-way interception valve and
a non-return valve.
Insulation as standard
in combination with kit 3.034938 it serves to connect from 3 to 5 VICTRIX
PRO V2 boilers in cascade installation (one kit required for each additional
boiler); includes a 2-way interception valve, a 3-way interception valve and
a non-return valve. Insulation as standard
the kit includes thermometer, thermometer holder, lock, thermostat with
manual reset, connection tap for pressure gauge, manual reset pressure
switch, gas intercepting valve trap, expansion vessel connection and
pressure switch for minimum pressure. Insulation as standard
The kit includes connection manifolds and support
The kit includes connection manifolds and support.
The kit includes connecting pipes, air vent, discharge tap, filling taps and
connection to expansion vessel.
The kit includes connecting pipes, air vent, discharge tap, filling taps and connection to expansion vessel
To be mainly used when the pump is independently dimensioned by the designer.
To be mainly used when the pump is independently dimensioned by the designer.
In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.
In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.
In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.
In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.
Used to manage the temperature of the water tank unit paired, in boiler
rooms, with cascade and zone regulator kit
Used to manage solar plant paired to boiler configurations with cascade and zone regulator kit (3.021522)
To realize two high temperature zones or two low
For HERCULES SOLAR 25 and HERCULES 25-35
To realize one low temperature zone and one high temperature zone
For HERCULES SOLAR 25 and HERCULES 25-35
To realize two low temperature zones and one high temperature zone
For HERCULES SOLAR 25 and HERCULES 25-35
To realize three high temperature zones or three low
For HERCULES SOLAR 25 and HERCULES 25-35
Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.
Including 2 knobs.
Only probe pipe, not pump included.
Available for VICTRIX Zeus.
To be used to manage the recirculation pump.
For wall-hung combi boilers and also for wall-hung with built-in storage tank.
For wall-hung outdoor boilers.
Storage tank connection kit for VICTRIX X TT ErP, VICTRIX EXA 24 X ErP, VICTRIX X TT and VICTRIX MAIOR 35 X TT ErP.
For the installation of heating only boilers.
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
For floor standing boilers: compact condensate drain pump kit.
For wall-hung boilers: compact condensate drain pump kit.
For VICTRIX SUPERIOR.
For VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24
For VICTRIX SUPERIOR, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2.
Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).
Available for wall-hung condensing boilers.
For wall-hung condensing boilers.
Aesthetic frame (240 mm height) that covers connections zone and the main
option kits for wall-hung condensing boilers IDEAL FOR REPLACEMENT
for VICTRIX SUPERIOR
Aestethics frame (250 mm height, 407 mm depth) that covers connections zone and the main option kits
For VICTRIX ZEUS 25-32.
For external installations, in partially protected places
For "B23" configuration.
For partially protected area installation
Used to manage the temperature of the water tank unit paired, in boiler
rooms, with cascade and zone regulator kit
Used to manage solar plant paired to boiler configurations with cascade and zone regulator kit (3.021522)
Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.
Including 2 knobs.
Only probe pipe, not pump included.
Available for VICTRIX Zeus.
To be used to manage the recirculation pump.
For wall-hung combi boilers and also for wall-hung with built-in storage tank.
For VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24
Available for: MAIOR EOLO, NIKE Mini 28 kW Special and MINI NIKE/EOLO.
for VICTRIX OMNIA, MYTHOS HP, EOLO/NIKE STAR 24 and NIKE/EOLO MYTHOS
For ducting air intake.
Dimensions (H x W x D) 209 x 732 x 260 mm.
For ducting air intake.
Dimensions (H x W x D) 209 x 932 x 260 mm.
For ducting air intake.
Dimensions (H x W x D) 209 x 1132 x 260 mm.
For ducting air intake.
Dimensions (H x W x D) 209 x 1422 x 260 mm.
For direct connection to the HYDRO VENT 2 return unit.
Dimensions (H x W x D) 214 x 714 x 105 mm.
For direct connection to the HYDRO VENT 3 return unit.
Dimensions (H x W x D) 214 x 914 x 105 mm.
For direct connection to the HYDRO VENT 4 return unit.
Dimensions (H x W x D) 214 x 1114 x 105 mm.
For direct connection to the HYDRO VENT 5 return unit.
Dimensions (H x W x D) 214 x 1404 x 105 mm.
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming from the terminal, towards the nozzle placed at right angles to the air outlet.
For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO, MAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.
Used to fix the air conditioners external units to the floor
Dimensions (mm) 620 x 620 x 50. Aesthetic frame required for the installation of UI CAS, to be provided for each unit.
For external installations, in partially protected places
USB key included
Gateway and USB key included
Wiring and USB key included
Ho preso visione dell'informativa sulla privacy e presto il consenso all'invio della Newsletter da parte di Immergas S.p.A
