Instructions and warning book
Contact us
Customer Care
MAGIS M26 T
Hydronic monobloc three-phase heat pumps
The customer service provides
prompt answers within 24 hours.
prompt answers within 24 hours.
Ideal for new buildings
Standard thermoregulation
Heating and cooling
Technical data MAGIS M26 T |
|
|---|---|
| Code | 3.032383 |
| C.H. Energy class at 55 °C | A+ |
| C.H. Energy class at 35 °C | A+++ |
| Heating output kW | 26,00 |
| Cooling output kW | 27,00 |
| Dimensions (HxWxD) mm | 1558 x 1129 x 528 |
| Refrigerant gas | R32 |
| COP | 4,08 |
| EER | 4,30 |
| Weight (kg) | 177 |
Technical data MAGIS M26 T |
|
|---|---|
| Code | 3.032383 |
| C.H. Energy class at 55 °C | A+ |
| C.H. Energy class at 35 °C | A+++ |
| Heating output kW | 26,00 |
| Cooling output kW | 27,00 |
| Dimensions (HxWxD) mm | 1558 x 1129 x 528 |
| Refrigerant gas | R32 |
| COP | 4,08 |
| EER | 4,30 |
| Weight (kg) | 177 |
Gallery
Hydronic monobloc three-phase heat pumps
• Pre-loaded refrigerant fluid R32;
• Remote control panel (with chronothermostat function) as standard;
• Including external probe, condensate discharge fitting, “Y" filter, 3 bar valve, 8 litres D.H.W. expansion vessel, low consumption pump system;
probe to manage D.H.W. or 2nd mixed zone heating set point till 65 °C (from 12 to 22 model) heating set point till 60 °C (from 26 to 30 model)
• Possibillity to realize integrated system (MAGIS M + gas boiler) with system controller
• Possibility to manage 1 zone heating/cooling, 1 zone only heating and 1 mixing valve
• Photovoltaic contact/Smart Grid
• Simple and multiple cascade
• Ermetically sealed
Remote Control Panel Cod.3.030863
Modulating chronotermostat, remote control with temperature/humidity sensor
Remote control kit Cod.3.023364
Can be directly combined with MAGIS HERCULES ErP and MAGIS M.
Requires 230 Vac power supply.
System controller Cod.3.021522
Electronic controller with a microprocessor designed to be a "single manager" for integrated systems (e.g., boilers, heat pumps, and solar thermal systems).
The system manager allows you to select and activate the most convenient heat source based on the set environmental and economic parameters. It features a backlit display. Power must be supplied via a 48 VDC or 24 VAC – 50 Hz transformer (not included).
Temperature/humidity active sensor kit Cod.3.021524
Allows you to measure ambient temperature and humidity. To be used with radiant systems that also work in cooling mode.
Requires low voltage power supply (24 Vac).
Room hygrostat Cod.3.023302
To be used with radiant systems that also work in cooling mode.
CRONO 7 (weekly digital chronothermostat) Cod.3.021622
ON/OFF room thermostat.
CRONO 7 WIRELESS (wireless weekly digital chronothermostat) Cod.3.021624
Wireless ON/OFF room thermostat.
SSR 6 VDC relay kit Cod.3.023946
only for system controller
EMR 12 VDC relay kit Cod.3.023945
only for system controller
External probe Cod.3.015266
For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.
NTC contact probe for storage tank Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer.
Provided as per standard on all Storage Tank Units in the catalogue (except UB 300/550/750 V2).
Probe kit for MAGIS M4-30 Cod.3.033324
To be used for DHW temperature control with storage tank units, for mixed zone managing or to control puffer/buffer temperature but also to manage solar plants.
Vertical buffer tank 200 litres Cod.3.035827
Ideal for outdoor installation in combination with MAGIS M and MAGIS M TOP.
Vertical buffer tank with capacity of 50 litres Cod.3.027539
Ideal for outdoor installation in combination with MAGIS M and MAGIS M TOP.
Vertical inertial storage tank 75 litre Cod.3.027288
Wall-hung (with bracket option kit) or floor-standing installation.
Bracket kit for wall mounting 75 inertial storage tank Cod.3.027290
Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
OMNISTOR 300 Cod.3.027910
The range of new OMNISTOR stainless steel storage tanks, is ideal to contain domestic hot water with an inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger with oversized coil
• 2 probe-supports and NTC probe for Immergas heat pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be disassembled (6 cm thick on OMNISTOR 300 and 8 cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the storage tank with option kit (maximum 4 solar flat plate-collectors)
• Pre-arranged to double electronic anode (option) code 3.025003
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger with oversized coil
• 2 probe-supports and NTC probe for Immergas heat pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be disassembled (6 cm thick on OMNISTOR 300 and 8 cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the storage tank with option kit (maximum 4 solar flat plate-collectors)
• Pre-arranged to double electronic anode (option) code 3.025003
Ideal for connection to heat pumps.
OMNISTOR 500 Cod.3.027911
The range of new OMNISTOR stainless steel storage tanks, is ideal to contain domestic hot water with an inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger with oversized coil
• 2 probe-supports and NTC probe for Immergas heat pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be disassembled (6 cm thick on OMNISTOR 300 and 8 cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the storage tank with option kit (maximum 4 solar flat plate-collectors)
• Pre-arranged to double electronic anode (option) code 3.025003
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger with oversized coil
• 2 probe-supports and NTC probe for Immergas heat pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be disassembled (6 cm thick on OMNISTOR 300 and 8 cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the storage tank with option kit (maximum 4 solar flat plate-collectors)
• Pre-arranged to double electronic anode (option) code 3.025003
Ideal for connection to heat pumps.
Double electronic anode kit Cod.3.025003
For OMNISTOR, INOXSTOR V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
2 kW electric resistance kit Cod.3.020861
For INOXSTOR 200-300-500 V2, OMNISTOR 300-500, UB 550-750 V2 and UB PRO SOL.
Power supply 230 or 400 Vac.
5 kW electric resistance kit Cod.3.020862
For UB 1000-1500 V2, UB 750 V2 and UB PRO SOL.
Power supply 230 or 400 Vac.
HYDRO 3 V2 Cod.3.033625
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
HYDRO 4 V2 Cod.3.033626
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
HYDRO FS 200 Cod.3.028500
Floor standing hydronic fancoil
HYDRO FS 400 Cod.3.028501
Floor standing hydronic fancoil
HYDRO FS 600 Cod.3.028502
Floor standing hydronic fancoil
HYDRO FS 800 Cod.3.028503
Floor standing hydronic fancoil
HYDRO FS 1000 Cod.3.028505
Floor standing hydronic fancoil
Dehumidifier kit Cod.3.021529
Designed for radiant panel cooling systems pairing, the dehumidifier helps keep indoor humidity levels under control, preventing the formation of condensation on walls, floors, or ceilings.
Only for recessed installation with codes 3.022146 and 3.022147
Dehumidifier front grille kit Cod.3.022147
Dehumidifier back frame kit Cod.3.022146
ZENITAIR MONO Cod.3.030601
Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
External cover kit with acoustical insulation for ZENITAIR-MONO Cod.3.030636
Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
Connection kit with flexible pipes and shut-off knobs 1" 1/4 Cod.3.032846
For MAGIS M8/12/14/16/18/22/26/30
Integration electric resistance kit 2, 4 or 6 kW for heating system Cod.3.021525
For internal installation
12 litre system expansion vessel kit Cod.3.011679
For plants with MAGIS M and MAGIS M TOP.
3-way valve kit Cod.3.020632
Probe kit for PT 1000 solar collector Cod.3.019374
Used to manage solar plant paired to boiler configurations with cascade and zone regulator kit (3.021522)
Hydronic monobloc three-phase heat pumps
• Pre-loaded refrigerant fluid R32;
• Remote control panel (with chronothermostat function) as standard;
• Including external probe, condensate discharge fitting, “Y" filter, 3 bar valve, 8 litres D.H.W. expansion vessel, low consumption pump system;
probe to manage D.H.W. or 2nd mixed zone heating set point till 65 °C (from 12 to 22 model) heating set point till 60 °C (from 26 to 30 model)
• Possibillity to realize integrated system (MAGIS M + gas boiler) with system controller
• Possibility to manage 1 zone heating/cooling, 1 zone only heating and 1 mixing valve
• Photovoltaic contact/Smart Grid
• Simple and multiple cascade
• Ermetically sealed
Remote Control Panel Cod.3.030863
Modulating chronotermostat, remote control with temperature/humidity sensor
Remote control kit Cod.3.023364
Can be directly combined with MAGIS HERCULES ErP and MAGIS M.
Requires 230 Vac power supply.
System controller Cod.3.021522
Electronic controller with a microprocessor designed to be a "single manager" for integrated systems (e.g., boilers, heat pumps, and solar thermal systems).
The system manager allows you to select and activate the most convenient heat source based on the set environmental and economic parameters. It features a backlit display. Power must be supplied via a 48 VDC or 24 VAC – 50 Hz transformer (not included).
Temperature/humidity active sensor kit Cod.3.021524
Allows you to measure ambient temperature and humidity. To be used with radiant systems that also work in cooling mode.
Requires low voltage power supply (24 Vac).
Room hygrostat Cod.3.023302
To be used with radiant systems that also work in cooling mode.
CRONO 7 (weekly digital chronothermostat) Cod.3.021622
ON/OFF room thermostat.
CRONO 7 WIRELESS (wireless weekly digital chronothermostat) Cod.3.021624
Wireless ON/OFF room thermostat.
SSR 6 VDC relay kit Cod.3.023946
only for system controller
EMR 12 VDC relay kit Cod.3.023945
only for system controller
External probe Cod.3.015266
For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.
NTC contact probe for storage tank Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer.
Provided as per standard on all Storage Tank Units in the catalogue (except UB 300/550/750 V2).
Probe kit for MAGIS M4-30 Cod.3.033324
To be used for DHW temperature control with storage tank units, for mixed zone managing or to control puffer/buffer temperature but also to manage solar plants.
Vertical buffer tank 200 litres Cod.3.035827
Ideal for outdoor installation in combination with MAGIS M and MAGIS M TOP.
Vertical buffer tank with capacity of 50 litres Cod.3.027539
Ideal for outdoor installation in combination with MAGIS M and MAGIS M TOP.
Vertical inertial storage tank 75 litre Cod.3.027288
Wall-hung (with bracket option kit) or floor-standing installation.
Bracket kit for wall mounting 75 inertial storage tank Cod.3.027290
Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
OMNISTOR 300 Cod.3.027910
The range of new OMNISTOR stainless steel storage tanks, is ideal to contain domestic hot water with an inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger with oversized coil
• 2 probe-supports and NTC probe for Immergas heat pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be disassembled (6 cm thick on OMNISTOR 300 and 8 cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the storage tank with option kit (maximum 4 solar flat plate-collectors)
• Pre-arranged to double electronic anode (option) code 3.025003
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger with oversized coil
• 2 probe-supports and NTC probe for Immergas heat pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be disassembled (6 cm thick on OMNISTOR 300 and 8 cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the storage tank with option kit (maximum 4 solar flat plate-collectors)
• Pre-arranged to double electronic anode (option) code 3.025003
Ideal for connection to heat pumps.
OMNISTOR 500 Cod.3.027911
The range of new OMNISTOR stainless steel storage tanks, is ideal to contain domestic hot water with an inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger with oversized coil
• 2 probe-supports and NTC probe for Immergas heat pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be disassembled (6 cm thick on OMNISTOR 300 and 8 cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the storage tank with option kit (maximum 4 solar flat plate-collectors)
• Pre-arranged to double electronic anode (option) code 3.025003
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger with oversized coil
• 2 probe-supports and NTC probe for Immergas heat pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be disassembled (6 cm thick on OMNISTOR 300 and 8 cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the storage tank with option kit (maximum 4 solar flat plate-collectors)
• Pre-arranged to double electronic anode (option) code 3.025003
Ideal for connection to heat pumps.
Double electronic anode kit Cod.3.025003
For OMNISTOR, INOXSTOR V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
2 kW electric resistance kit Cod.3.020861
For INOXSTOR 200-300-500 V2, OMNISTOR 300-500, UB 550-750 V2 and UB PRO SOL.
Power supply 230 or 400 Vac.
5 kW electric resistance kit Cod.3.020862
For UB 1000-1500 V2, UB 750 V2 and UB PRO SOL.
Power supply 230 or 400 Vac.
HYDRO 3 V2 Cod.3.033625
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
HYDRO 4 V2 Cod.3.033626
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
HYDRO FS 200 Cod.3.028500
Floor standing hydronic fancoil
HYDRO FS 400 Cod.3.028501
Floor standing hydronic fancoil
HYDRO FS 600 Cod.3.028502
Floor standing hydronic fancoil
HYDRO FS 800 Cod.3.028503
Floor standing hydronic fancoil
HYDRO FS 1000 Cod.3.028505
Floor standing hydronic fancoil
Dehumidifier kit Cod.3.021529
Designed for radiant panel cooling systems pairing, the dehumidifier helps keep indoor humidity levels under control, preventing the formation of condensation on walls, floors, or ceilings.
Only for recessed installation with codes 3.022146 and 3.022147
Dehumidifier front grille kit Cod.3.022147
Dehumidifier back frame kit Cod.3.022146
ZENITAIR MONO Cod.3.030601
Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
External cover kit with acoustical insulation for ZENITAIR-MONO Cod.3.030636
Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
Connection kit with flexible pipes and shut-off knobs 1" 1/4 Cod.3.032846
For MAGIS M8/12/14/16/18/22/26/30
Integration electric resistance kit 2, 4 or 6 kW for heating system Cod.3.021525
For internal installation
12 litre system expansion vessel kit Cod.3.011679
For plants with MAGIS M and MAGIS M TOP.
3-way valve kit Cod.3.020632
Probe kit for PT 1000 solar collector Cod.3.019374
Used to manage solar plant paired to boiler configurations with cascade and zone regulator kit (3.021522)
Related products
Contacts
Recupero Codice Tessera
Inserisci l’e-mail con cui sei registrato al Caius Club e il dato richiesto ti sarà inviato automaticamente.
Se non hai mai registrato la tua e-mail o se l'hai cambiata, comunicala subito a caiusclub@immergas.com o contatta il Club al numero verde 800 306 306.
Recupero Password
Inserisci il codice tessera e l’e-mail con cui sei registrato al Caius Club e il dato richiesto ti sarà inviato automaticamente.
Se non hai mai registrato la tua e-mail o se l'hai cambiata, comunicala subito a caiusclub@immergas.com o contatta il Club al numero verde 800 306 306.
